IDENTIFICATION

COMPOSITIONAL INFORMATION

This section is condensed.  For complete information please request our printed MSDS or e-mail us, Cresset@Cresset.com, with your name, address, etc. for quicker response.  

ROUTE(S) OF EXPOSURE AND HEALTH EFFECTS

FIRST AID PROCEDURES

PHYSICAL DATA

FIRE FIGHTING PROCEDURES AND EXTINGUISHING MEDIA

Alcohol foam, water spray (fog), dry chemical, and carbon dioxide type extinguishing agents may all be suitable for extinguishing fires involving this type of product depending on size or potential size of fire and circumstances related to the situation.  Plan fire protection and response strategy through consultation with local fire protection authorities or appropriate specialists.   Self-contained breathing apparatus and full protective clothing should be worn.   Flammable liquid and vapor.  Vapors are heavier than air and may travel along the ground or may be moved by ventilation to an ignition source and may flash back.

REACTIVITY

SPILL OR LEAK PROCEDURES

Prevent ignition, stop leak, ventilate area, contain spill by diking or impounding.  Add sand, earth or other suitable absorbent to spill area.  Wear respiratory protection for large spill, leak or release.  Prevent product from entering sewers, storm drains, surface waters and soil.

DISPOSAL METHODS

Dispose of contaminated product and materials used in the cleaning of spills or leaks in a manner complying with Federal, State and Local regulations.

PROTECTION INFORMATION

EYES:  Use splash proof chemical goggles or face shield when eye contact may occur.

SKIN:  Impervious gloves are recommended.

RESPIRATORY:  Use with adequate ventilation.  Ventilate as needed to comply with exposure limit.  In the event of vapor concentrations exceeding the time weighted exposure limit use a NIOSH approved cartridge respirator or gas mask.

DOT and EPA (Not required for MSDS)

When transported by ground, by common carrier or by UPS, this product requires ORM-D Label.

CORPORATE STATEMENT

The information and recommendations contained herein are, to the best of Cresset Chemical Company's knowledge and belief, accurate and reliable as of the date issued.  Cresset Chemical Company does not warrant or guarantee their accuracy or reliability, and shall not be liable for any loss or damage arising out of the use thereof.  The information and recommendations are offered for the user's consideration and examination, and it is the user's responsibility to satisfy itself that they are suitable and complete for its particular use.