CRESSET CHEMICAL COMPANY
Form Release Agents Cures Seals Etc. Form Treatments Testimonials Contacts Specs MSDS Properties Form Sprayers Order FREE Literature Cleaners Instructional Literature Regulations Trade Shows Related Industry Links Aerosols
How Store-Cote RP6 Rust Preventative Works
Protects Steel Forms
Store-Cote RP6 Rust Preventative protects steel forms from rusting even when
stored outdoors in the elements. You can spray Store-Cote RP6 with your regular form oil
sprayer. It stays liquid and does not harden. No more need to scrape or sand blast your
steel forms to remove paint-like coatings.
To reuse your steel forms after storage, simply wipe off the accumulated dust and debris and apply any Crete-Lease Release Agent before placing fresh concrete.
How well does it work?
Even though some specially formulated rust preventatives might prevent rust a
little better, the advantages of using Store-Cote RP6 far outweigh using one of them. Rust
preventatives not designed to release concrete cause considerable dusting on the surface
of the hardened concrete. Because Store-Cote RP6 contains fatty acids and is a release
agent, it lets you simply wipe off the accumulated dust and debris from the stored forms.
It blends in with your release agent spraying process and it promotes the easy reuse of
forms and non-dusting on hardened concrete...all these combine to give you the best
available rust protection technology.
What about salt water environments?
Air near coastal environments is much more corrosive because of the salt it
contains. The figure 6 in the name RP6 indicates that you can expect about six months of
protection against rust. It may be sooner than six months in environments close to salt
water. If you're in an area of salty air and your steel forms begin to show rust, simply
apply another coating of Store-Cote RP6. Repeat as often as necessary to protect the
forms.
Why use RP6?
Five very good reasons: (1) Store-Cote RP6 protects steel forms against rust,
(2) applies with your existing spray equipment, (3) does not require scraping off, (4)
residual Store-Cote RP6 works as a release agent without causing dusting of the surface of
the hardened concrete, and (5) meets VOC regulations in all states. It's environmentally
friendly.
Packaging
New! Now available in aerosol for tools, convenience and touch-up. Most
commonly supplied in 5 gallon pails and 55 gallon drums. Also available in 1 gallon
bottles and 275 gallon MegaPaks.
|
For Additional Browsing:
Form Release Agents Cures Seals Etc. Form Treatments Testimonials Contacts Specs MSDS Properties Form Sprayers Order FREE Literature Cleaners Instructional Literature Regulations Trade Shows Related Industry Links Aerosols
Return to Form Treatments Page
Cresset and Store-Cote are trade marks of Cresset Chemical Company.
Copyright © 2008, Cresset Chemical Company.
All rights reserved.