CRESSET CHEMICAL COMPANY

Form Release Agents    Cures  Seals  Etc.    Form Treatments    Testimonials    Contacts

Specs  MSDS  Properties     Form Sprayers    Order FREE Literature    Cleaners

Instructional Literature   Regulations   Trade Shows   Related Industry Links   Aerosols

SPECIFICATION SHEET
CRETE-LEASE 810 RELEASE AGENT

Crete-Lease 810 is used for producing machine made concrete pipe. Updated May 2007.

Environmental Report Card
Non-flammable...........Yes
VOC compliant...........Yes
Non-carcinogenic........Yes
Solventless.............Yes

1. PRODUCT
Crete-Lease 810 Release Agent
 

2. MANUFACTURER
Cresset Chemical Company, Inc.
One Cresset Center, Box 367
Weston, OH 43569
800-367-2020 USA & Canada
419-669-2041
(Fax) 419.669.2200
www.cresset.com
cresset@cresset.com  
 

3. PRODUCT DESCRIPTION
Basic Use: a. Use Crete-Lease 810 Release Agent without dilution with zero slump (dry mixed) concrete. Use it on pipe pallets and header rings for machine made pipes. It:

• Promotes easy stripping of header rings and pallets
• Helps minimize clean-up of zero slump mixers and other equipment
• Applies in sub-freezing temperatures or very hot temperatures
• Applies by brush, mop, sprayer, dipping, etc.

Limitations: Not recommended for forms or formliners made from expanded polystyrene, SBR, or natural rubber or latexes made of these. Use Crete-Lease 20-VOC on any form or formliner.

Ground Shipping in the USA: Containers holding 275 gallons or 55 gallons or 5 gallons or less (regardless of quantity) are not federally regulated and shipping product in the Cresset package does not require following hazardous shipping requirements.

Applicable Standards: Corps of Engineers, "Civil Works Construction Guide Specifications," CW-03101, Section 5.3 and Section 8: and Corps of Engineers, "Guide Specification Military Construction," CEGS-03300, Section 10.8.
 

4. TECHNICAL DATA
Please see Tables.

TABLE OF PROPERTIES

Composition: A proprietary blend of neutralized vegetable oils in a very heavy mineral oil. Contains no waxes, no silicones...no carcinogens.

TABLE OF FORM AND FORMLINER COMPATIBILITY

COVERAGE WITH CRETE-LEASE 810

5. APPLICATION
Preparatory Work: Form surfaces should be clean, dry and free from contaminants. Apply Crete-Lease 810 minutes or hours before actual use.

Methods:  When used on machine made pipe spray, roll, brush, dip or mop it on.

Spraying Recommendations: For machine made pipe completely coat header rings and pipe pallets.

Storage: Crete-Lease 810, in sealed containers, will keep indefinitely at temperatures from -20°F to 140°F (-30°C to 60°C). Section 1910.106 of "General Industrial Standards for Occupational Safety and Health" classifies Crete-Lease 810 as a Class 2 liquid for the purpose of meeting OSHA storage requirements.

Precautions: Keep out of reach of children. Avoid prolonged contact with the skin. Use with adequate ventilation. See Material Safety Data Sheet for additional information.
 

6. AVAILABILITY AND COST
Availability: Crete-Lease 810 is available in 1 and 5 gallon containers; orange and white striped 55 gallon drums and 275 gallon MegaPaks. Contact Cresset Chemical Company for your nearest distributor.

Cost: For machine made pipe the cost on hard, smooth surfaces is about $0.008 per square foot (January 2007).
 

7. LIMITED WARRANTY
Cresset Chemical Company warrants the product against defects in materials for a period of 1 year from purchase. If Cresset receives notice of such defects during the warranty period, Cresset at its option will either replace the product or refund the purchase price. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. CRESSET SPECIFICALLY DISCLAIMS THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDIES PROVIDED HEREIN ARE BUYER'S SOLE AND EXCLUSIVE REMEDIES. IN NO EVENT SHALL CRESSET CHEMICAL COMPANY BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFIT) WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY.
 

8. MAINTENANCE
Not required.
 

9. TECHNICAL SERVICES
Cresset Chemical Company specializes in developing, distributing and servicing release agents. Our technical support includes assistance in optimizing concrete mixtures for achieving architectural surfaces; release agent compatibility with superplasticizers, coatings, form facings, etc.; and solving other concrete surface blemish problems.

Free literature includes:

• Catalog of products
• Material Safety Data Sheets
• "Cresset Concrete Standards" (Application techniques to obtain high visual impact concrete surfaces)
• "Surface Voids and How to Eliminate Them"

Over 75 distributors in the United States, Canada, Australia and Germany to serve you. Your technical inquiries are welcome, please call, write or FAX.

For the most up-to-date copy please download from Cresset Chemical Company's web site, www.cresset.com, or contact us for a printed copy.

Crete-Lease 810 MSDS

Other Specification Sheets:
Index of All Cresset's Specification Sheets
Crete-Lease 20-VOC Release Agent (Water Based)
Crete-Lease 880-VOC Release Agent
Crete-Lease 880 Release Agent
Crete-Lease 727 Release Agent
Super-Strip 44 Form Releaser
Super-Strip "AquaBlend" Form Releaser
Super-Strip 60 Form Releaser
Super-Strip 65 Form Releaser
Super-Strip 600 Concentrated Form Releaser
Crete-Lease "Latex" Mold Release - Aerosol
Crete-Lease "Bond Breaker" for Tilt-Up

For Additional Browsing:
CCS (Cresset Concrete Standards)
3 Part CSI Specification
All Release Agents Summary of Properties

Form Release Agents    Cures  Seals  Etc.    Form Treatments    Testimonials    Contacts

Specs  MSDS  Properties     Form Sprayers    Order FREE Literature    Cleaners

Instructional Literature   Regulations   Trade Shows   Related Industry Links   Aerosols

Return to Release Agent Page

Cresset Home Page

Cresset and Crete-Lease are trade marks of Cresset Chemical Company.

Copyright © 2008, Cresset Chemical Company.
All rights reserved.