CRESSET CHEMICAL COMPANY

Form Release Agents    Cures  Seals  Etc.    Form Treatments    Testimonials    Contacts

Specs  MSDS  Properties     Form Sprayers    Order FREE Literature    Cleaners

Instructional Literature   Regulations   Trade Shows   Related Industry Links   Aerosols

SPECIFICATION SHEET
SPATTER-COTE 100 SPATTER PROTECTION

 

Spatter-Cote 100 Spatter Protection provides for easy removal of concrete spatter from the back ends of ready mix trucks. Also effectively removes concrete spatter and build-up from tools, forms, screeds and other equipment. Updated May 2007.

 

Environmental Report Card
Non-carcinogenic..........Yes
Solventless...............Yes

 

1. PRODUCT
Spatter-Cote 100 Spatter Protection
 

2. MANUFACTURER
Cresset Chemical Company, Inc.
One Cresset Center, Box 367
Weston, OH 43569
800-367-2020 USA & Canada
419-669-2041
(Fax) 419.669.2200
www.cresset.com
cresset@cresset.com  
 

3. PRODUCT DESCRIPTION
Basic Use: Spatter-Cote 100 is applied to equipment surfaces exposed to concrete spatter. After use, simply clean the equipment by hosing off. Regular use keeps equipment clean and free from build-up.

Spatter-Cote 100 Spatter Protection:

Use Spatter-Cote 100 Spatter Protection on:

Ground Shipping in the USA: Containers holding 55 gallons or 5 gallons or less (regardless of quantity) are not federally regulated and shipping product in the Cresset package does not require following hazardous shipping requirements. Aerosols or a container holding 275 gallons or a bulk shipment requires federally mandated procedures on the driver, container and shipping papers. See Cresset brochure "Ground Shipping" for details.
 

4. TECHNICAL DATA
Please see Tables.

 

TABLE OF PROPERTIES

Aerosol All Others Metric
Color Amber Amber Amber
Opacity Clear Clear Clear
Freeze Damage None None None
Flash Point NA 150° F 65° C
Viscosity (centipoises) NA 5 @ 68° F 5 @ 20° C
Density 7.2 lbs/gal 7.2 lbs/gal 861 g/L
VOC (Volatile Organic Compounds) Exempt 245 g/L 245 g/L
VOC (Volatile Organic Compounds) 2.04 lbs/gal 3.59 lbs/gal ---

Composition: A proprietary mixture of corrosion inhibitors, mineral oil and emulsifiers. Contains no waxes, no silicones...no carcinogens.

 

COVERAGE WITH SPATTER-COTE 100

Surface (sq ft/gal) (m2/l)
Hard & Smooth 1,500 37

 

5. APPLICATION
Preparatory Work: Equipment surfaces should be dry and free of loose dirt and dust. (Spatter-Cote 100 may be applied to surfaces with concrete build-up.)

Regular Maintenance Program: To keep the equipment clean apply Spatter-Cote 100 daily. Typically, it is applied soon after hosing off the equipment.

Keeping new windows (and other fixtures) clean during construction: Apply Spatter-Cote 100 directly to windows and other hard surfaced items. If precipitation removes Spatter-Cote 100 simply re-apply it. Just hose off the windows in order to remove any spatter that collects on them. Do not let Spatter-Cote 100 collect on non-porous surfaces. When thoroughly hosed off windows, etc. it will not interfere with subsequent painting operations.

Methods: Apply Spatter-Cote 100 by spray, brush or roller to the equipment surface before being exposed to concrete spatter. Spatter-Cote 100 may be applied hours or up to 7 days before placing the equipment into service. To clean, hose the equipment surface protected by Spatter-Cote 100 with water. This will remove the concrete spatter, dirt and grease. Once the equipment dries, recoat with Spatter-Cote 100.

Dilution with fuel oils, diesel fuel or water will reduce the product's effectiveness.

Storage: Spatter-Cote 100 Spatter Protection, in sealed containers, will keep indefinitely at temperatures from -20°F to 140°F (-30°C to 60°C). Section 1910.107 of "General Industrial Standards for Occupational Safety and Health" classifies Spatter-Cote 100 Spatter Protection as a 3A liquid for the purpose of meeting OSHA storage requirements.

Precautions: Keep out of reach of children. Avoid prolonged contact with the skin. Us with adequate ventilation. See Material Safety Data Sheet for additional safety information.
 

6. AVAILABILITY AND COST
Availability: Spatter-Cote 100 Spatter Protection is available in several different containers; Aerosol, 1 gallon, 5 gallon, orange and white 55 gallon drum and a disposable 275 gallon MegaPak. Contact Cresset Chemical Company for your nearest distributor.

Cost: The cost on hard, smooth surfaces is about $0.01 per square foot (January 2007).
 

7. LIMITED WARRANTY
Cresset Chemical Company warrants the product against defects in materials for a period of 1 year from purchase. If Cresset receives notice of such defects during the warranty period, Cresset at its option will either replace the product or refund the purchase price. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. CRESSET SPECIFICALLY DISCLAIMS THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDIES PROVIDED HEREIN ARE BUYER'S SOLE AND EXCLUSIVE REMEDIES. IN NO EVENT SHALL CRESSET CHEMICAL COMPANY BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFIT) WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY.
 

8. MAINTENANCE
Not required.
 

9. TECHNICAL SERVICES
Cresset Chemical Company specializes in developing, distributing and servicing release agents. Our technical support includes assistance in optimizing concrete mixtures for achieving architectural surfaces; release agent compatibility with superplasticizers, coatings, form facings, etc.; and solving other concrete surface blemish problems.

Free literature includes:

Over 75 distributors in the United States, Canada, Australia and Germany to serve you. Your technical inquiries are welcome, please call, write or FAX.

For the most up-to-date copy please download from Cresset Chemical Company's web site, www.cresset.com, or contact us for a printed copy.

 

Other Specification Sheets:
Index of All Cresset's Specification Sheets
Store-Cote RP-6 Rust Preventative
Crete-Lease "Break-In" Aluminum Form Conditioner
Form Cleaner 240 Rust Remover

 

Form Release Agents    Cures  Seals  Etc.    Form Treatments    Testimonials    Contacts

Specs  MSDS  Properties     Form Sprayers    Order FREE Literature    Cleaners

Instructional Literature   Regulations   Trade Shows   Related Industry Links   Aerosols

 

Return to Form Treatments Page

 


Cresset Home Page

 

Cresset is a trade mark of Cresset Chemical Company.

Copyright © 2008, Cresset Chemical Company.
All rights reserved.