Super Strip 600 Specification Sheet

CRESSET CHEMICAL COMPANY

Form Release Agents    Cures  Seals  Etc.    Form Treatments    Testimonials    Contacts

Specs  MSDS  Properties     Form Sprayers    Order FREE Literature    Cleaners

Instructional Literature   Regulations   Trade Shows   Related Industry Links   Aerosols

SPECIFICATION SHEET SUPER-STRIP 600 CONCENTRATED FORM RELEASER

Super-Strip 600 is concentrated...dilute it with up to 10 parts of diesel oil. This is a very good "overall" release agent.Updated May 2007.

Environmental Report Card Non-toxic.................Yes Non-flammable.............Yes VOC compliant.............Yes Solventless...............Yes Non-carcinogenic..........Yes

1. PRODUCT
Super-Strip 600 Concentrated Form Releaser

2. MANUFACTURER
Cresset Chemical Company, Inc. One Cresset Center, Box 367
Weston, OH 43569 800-367-2020 USA & Canada
419-669-2041
(Fax) 419.669.2200
www.cresset.com
cresset@cresset.com

3. PRODUCT DESCRIPTION
Basic Use: Super-Strip 600 Concentrated Form Releaser diluted with 10 parts of #2 fuel oil:

Helps minimize clean-up of forms and equipment
Promotes easy form stripping
Does not "kill" concrete surfaces when properly applied
Is especially good on aluminum forms
Can be applied in sub-freezing or very hot temperatures

Limitations: 1. Not recommended for forms or formliners made from expanded polystyrene, SBR, or natural rubber or latexes made of these. Use Crete-Lease 20-VOC on any form or formliner.

2. INCOMPLETE MIXING IS THE SINGLE MOST COMMON CAUSE OF INCONSISTENT RESULTS.

3. The amount and type of oil added to Super-Strip 600 may have an effect on the flash point and formliner compatibility. Testing is recommended to assure desired results.

Ground Shipping in the USA: Containers holding 275 gallons, 55 gallons or 5 gallons or less (regardless of quantity) are not federally regulated and shipping product in the Cresset package does not require following hazardous shipping requirements.

4. TECHNICAL DATA
Please see Tables.

TABLE OF PROPERTIES

		`Metric`
`Color`	Brown	`Brown`
`"Freeze" Temperature`	`15° F`	`-9 ° C`
`Freeze Damage`	`None`	`None`
`Flash Point`	`310° F`	`154 ° C`
`Viscosity (centipoises)`	`60 @ 72° F`	`60 @ 22° C`
`Density`	`7.5 lbs/gal`	`861 g/L`
`Solids`	`None`	`None`
`Specific Gravity`	`0.90`
`VOC (Volatile Organic Compounds)`	`100 g/L (concentrate)`	`100 g/L (concentrate)`

Composition: A proprietary blend of vegetable oils in petroleum based oils. Contains no silicones...no carcinogens. VOC: This number increases to about 790 g/L when properly diluted with diesel fuel, fuel oil or kerosene.

TABLE OF FORM AND FORMLINER COMPATIBILITY

`Plywood`	`All Grades, Pre-oiled, Overlaid (LDO, MDO, HDO)`
`Plastics`	`Fiberglass Reinforced, ABS, PVC`
`Coatings`	`Epoxy, Urethane`
`Elastomerics`	`Urethane, Silicone`
`Steel`
`Aluminum`
`Wood`

COVERAGE WITH SUPER-STRIP 600 (After 10:1 Dilution)

`Form Surface`	`(sq ft/gal)`	`(m2/l)`
`Hard & Smooth`	`1,000`	`25`
`Pre-oiled Plywood`	`600`	`15`
`Untreated Plywood`	`500`	`12`

5. APPLICATION
Preparatory Work: Form surfaces should be clean, dry and free from contaminants.

Blending: Mix Super-Strip 600 Concentrate in the following proportion: One gallon concentrate to ten gallons diesel fuel oil. For example: One five gallon pail of Super-Strip 600 Concentrate makes a total of 55 gallons of release agent. MIX WELL.

Note: Use any of these oils to to dilute Super-Strip 600 Concentrate: a) #2 fuel oil, b) #1 fuel oil, c) kerosene, d) diesel fuel, or e) mineral spirits.

Method: Spray, roll, brush or wipe the release agent on the form. APPLY IN A THIN FILM. Wipe off any excess release agent that may have accumulated in the lower sections or indentations of the form. Too much release agent may cause small surface holes, discoloration, soft spots, concrete build-up, or increased difficulty in stripping.

Spraying Recommendations: Spraying pressure should be 35 psi or higher. Use flat spray tips to produce the best looking concrete. (Spraying Systems Co., Inc. flat spray tip 80015 or 8001 or equivalent, is recommended for most summer and winter applications.)

Storage: Super-Strip 600 Concentrate, in sealed containers, will keep indefinitely at temperatures from -20°F to 140°F (-30°C to 60°C). Section 1910.106 of "General Industrial Standards for Occupational Safety and Health" classifies Super-Strip 600 Concentrate as a IIIA liquid for the purpose of meeting OSHA storage requirements.

6. AVAILABILITY
Availability: Super-Strip 600 is available in new 1 and 5 gallon containers. The standard drum is a new blue, recyclable plastic 55 gallon drum. It is also available in a new 275 gallon MegaPak. Contact Cresset Chemical Company for your nearest distributor.

7. LIMITED WARRANTY
Cresset Chemical Company warrants the product against defects in materials for a period of 1 year from purchase. If Cresset receives notice of such defects during the warranty period, Cresset at its option will either replace the product or refund the purchase price. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. CRESSET SPECIFICALLY DISCLAIMS THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDIES PROVIDED HEREIN ARE BUYER'S SOLE AND EXCLUSIVE REMEDIES. IN NO EVENT SHALL CRESSET CHEMICAL COMPANY BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFIT) WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY.

8. MAINTENANCE
Not required.

9. TECHNICAL SERVICES
Cresset Chemical Company specializes in developing, distributing and servicing release agents. Our technical support includes assistance in optimizing concrete mixtures for achieving architectural surfaces; release agent compatibility with superplasticizers, coatings, form facings, etc.; and solving other concrete surface blemish problems.

Free literature includes:

Catalog of products
Material Safety Data Sheets
"Cresset Concrete Standards" (Application techniques to obtain high visual impact concrete surfaces)
"Surface Voids and How to Eliminate Them"

Over 75 distributors in the United States, Canada, Australia and Germany to serve you. Your technical inquiries are welcome, please call, write or FAX.

For the most up-to-date copy please download from Cresset Chemical Company's web site, www.cresset.com, or contact us for a printed copy.

Other Specification Sheets:
Index of All Cresset's Specification Sheets
Crete-Lease 20-VOC Release Agent (Water Based)
Crete-Lease 880-VOC Release Agent
Crete-Lease 880 Release Agent
Crete-Lease 727 Release Agent
Crete-Lease 810 Release Agent
Super-Strip 44 Form Releaser
Super-Strip "AquaBlend" Form Releaser
Super-Strip 60 Form Releaser
Super-Strip 65 Form Releaser
Crete-Lease "Latex" Mold Release - Aerosol
Crete-Lease "Bond Breaker" for Tilt-Up

For Additional Browsing:
CCS (Cresset Concrete Standards)
3 Part CSI Specification
All Release Agents Summary of Properties

Form Release Agents    Cures  Seals  Etc.    Form Treatments    Testimonials    Contacts

Specs  MSDS  Properties     Form Sprayers    Order FREE Literature    Cleaners

Instructional Literature   Regulations   Trade Shows   Related Industry Links   Aerosols

Return to Release Agent Page

Cresset Home Page

Cresset is a trade mark of Cresset Chemical Company.